10 Things We All Love About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled.

Once the glass is removed from the window, it’s best to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might be interested in the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and Upvc door repairs near me long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you’ll have to open the window to access the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you’ve relocated your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. Fortunately, it’s easy to fix a loose uPVC window handle yourself. First, you’ll need to shut the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it’s crucial to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how severe the issue is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to ‘over-caulk’ as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window repair is difficult to open, or if it blows open with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy procedure, but it is easier to do if you have someone to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window repair should open.

The problem can be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using the lubricant that doesn’t contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the chance of windows sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become misaligned due to wear, creating gaps where the sash meets frame. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them aligned or replaced. In addition, the interlock could also become unbalanced. It is located on the hinge’s side, and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The seals may wear out or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc door repairs near Me windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. They will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come the point when it’s more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.