15 Up-And-Coming Window Repair Bloggers You Need To See

Window Repairs

Window repairs can help homeowners save money and make their homes comfortable. In the event of severe damage, such as broken glass or a damaged frame, window replacement may be required.

Many other problems can be solved to prolong the life of windows. Some common issues include:

Cracked or Broken Panes

Whether it’s an errant rock being tossed by your lawnmowers, or a tree branch that has been blown by strong winds, cracked window glass is not only ugly, but it can also result in higher electricity bills as the broken pieces allow cold air into your home. It’s relatively easy to repair windows with damaged panes.

Start by carefully removing glass with gloves and safety sunglasses. You may need to employ a utility knife to loosen any remaining putty or glazing compound around the edges of the frame. Then, clean the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof to the frame’s perimeter. This will prevent water from getting into the frame through the crack and cause further damage.

If you have double glazing; http://forum.insnetz.com,-paned glass, cracks that are not treated properly could weaken the gas layer that lies between the panes, making your windows less efficient in insulating. If the crack is so severe that it compromises the strength of the window or if the inner pane is missing you might need to consult a professional.

Cracks in the glass caused by thermal stress may occur when there’s an extreme temperature difference both inside and outside your home. This causes the glass to expand and shrink. If the cracks are on two sides of a glass, it is best to replace it rather than try to repair it.

For windows that have cracked but aren’t quite ready to be replaced, clear tape can do a good job of securing the crack and preventing bugs from entering cold air. You can cut an area of nylon stocking or tarp that’s sufficient to cover the crack and fix it with duct tape. This isn’t a long-term solution, but it works well in the event of a crisis and keeps cold air and insects out of your home. If you notice cracks or blemishes on your older windows it is recommended to contact the local company to determine whether replacing the entire window is a better option.

Rotten Wood

Wood rot is a typical issue with windows. It can damage a home’s appearance and create a safety hazard. However, it is possible to fix rotted wood. The first step is to ensure that the source of the rot has been dealt with. Look for leaks on the roof and other places that water may get into the wood.

Next, you will need to take out any rotten parts of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. After the areas that are rotten have been eliminated then you must replace them with new wood. Pre-treated wood is suggested for this project since it will resist the onset of rot. If you are not able to replace the rotted wood, you can try using filler or wood hardener to repair the damaged area. The majority of hardware stores have this type of product. To get the best results, follow the directions on the label.

After you have repaired the damaged areas of the window sill, it’s essential to safeguard the area. You can do this by applying a waterproof wood sealant. A product like Sikkens is an excellent option to accomplish this task.

Make use of a two-part epoxy to safeguard the wood from further damage. It is easy to apply and leaves a beautiful finish. It is important to follow the instructions on the label. When the epoxy filler is dry, you can sand down the surface of the wooden. Start with a rough sandpaper, and then move on to more smoother grades.

You don’t want to expose the rotted part to more moisture. Therefore, it is recommended to cover the repaired area with an oil-based primer which will shield it from moisture. Then, you can apply waterproof wood sealant.

The Won’t open

A window that isn’t opening could be due to various reasons. The house may have settled, or the wood frames might have warped due to humid weather. Someone might have also nailed them shut for security. However, with a bit of patience and the right tools, most windows that are locked can be opened.

One of the main causes of a window that won’t open is accumulated debris or gunk on its moving parts. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges and locks. In addition, metal hardware is prone to be rusty when it comes in contact with humidity and direct sunlight. Spray grease on these areas will help to prevent oxidation and keep your windows functioning well.

The pulleys used to raise or lower the window can be loosened, or break. These components can lose tension and become obstructed when they are placed higher than two floors above the surface.

If you have difficulty opening a door, double glazing try using a pry-bar to gently open the window. Place a block of wood on the frame to give your pry bar more leverage and be sure not to harm the window or wood. Try applying a hairdryer along the frame’s edges for a few minutes. This will warm the wood, making it easier to move.

A damaged spring can be the reason for windows that don’t lift or lower. You will need to consult the owner’s manual for more details based on the manufacturer of your windows.

If you’ve tried cleaning and lubricating the moving components on your windows, but they still aren’t opening, it’s probably time to replace windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don’t let the windows of your home go from functional to unusable. A window that isn’t properly shut could expose your home to burglary and water damages. Contact our team today for more information about our replacement windows as well as our services!