Buzzwords De-Buzzed: 10 Alternative Ways To Deliver Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob

If your 500 remote key fob has stopped working, it might be time to replace the battery. If you replace the battery, but it isn’t working it could be the issue elsewhere.

United Locksmith specializes in the creation of new keys for classic cars. We have the tools as well as the parts required for this service.

Dead Coin Battery

A dead battery is the main reason for your fiat remote key 500 keyfob not locking or unlocking the doors. The key fob comes with an in-built battery which will quickly drain when it isn’t utilized frequently enough. If your remote starts to show signs of a loss of range, or has stopped functioning in the middle of the night, then your battery may be dead.

The battery inside the key fob is held in place by metal clips for retaining. If the clips are loose it can cause contact issues that will stop the remote from receiving power. By using a small flathead screwdriver, push the retaining clip outwards to take out the battery and then insert a fresh one. Be sure to use a replacement with the same type of voltage, dimensions, and specification as the original battery.

The key fob might also be damaged or corroded due to exposure to water. Even a small bath in soapy, warm water can damage the chip. It is recommended to keep your key fob in a dry place.

Water Damage

Damage to your water supply could be the reason for your key fob’s inability to function properly. The rubber seals on key fobs keep them from being damaged by a slight drizzle or splash of water. However, it is crucial to keep the keys from the washing machine, ocean, and pool.

The key fob contains an electronic chip inside that transmits a signal to your car’s immobilizer system. This is the reason why your 500 can lock or start, but in the event that the chip becomes wet, it’s unable to longer function.

You can clean your key fob’s internal electronics using isopropyl alcohol or an electronic cleaner to see if they are still good. However, it’s better to purchase a replacement from a dealership instead of trying to fix the key fob which is submerged in salt water.

While a replacement fob could cost you a little bit of money, it is much less expensive than paying for your Fiat 500 to be towed to the dealership and repaired! You can also do it yourself by following only a few steps. Just make sure you have the correct battery type before you attempt to open your key fob. You can find step-bystep directions for any car keyfob online.

Faulty Chip

The chip in the key fob communicates to your car’s immobiliser system to ensure the vehicle is able to start when the correct key is used. If the chip is damaged, or damaged in any way the car won’t start.

A chip that is defective can happen due to several reasons, but most often it is due to water damage or an unresponsive battery. Whatever the reason, it’s an ideal idea to hand this work to a locksmith who will be able to replace the chip for you swiftly and at a cost-effective price.

If your key fob will not work after being exposed to clean rain or tap water, remove the battery. Clean the electronic component with a paper towel. If the key fob will not function, there is the possibility that it has a fried component and needs to be replaced.

Some people will go to their dealer when they require an entirely new spare fiat 500 key fob. But, this can be a costly option. United Locksmith is the best option for you if would like to have your Fiat keyfob repaired at a reasonable cost. We have the tools and experience needed to repair your fiat 500 replacement key near me (you could try here) fob quickly and professionally. manner.

Faulty Receiver Module

fiat 500 duplicate key key fobs transmit an electronic signal to the vehicle that can unlock and lock doors (and start the car if it has an automatic transmission) up to 50 feet. There are a few reasons why the fob may not function. This could be due to a dead coin battery water damage or worn buttons, a receiver module issue and signal interference or an electronic chip that has failed.

If the fob was in the pocket that has been subject to extreme trauma (such as being dropped on the hard floor or washed in the washer) it might not be in a position to communicate with the Body Control Module (BCM) of the vehicle. This is because the BCM is a secure system that can only accept signals from a genuine original key and not accept any other.

If this is the case, then you will need to replace your fob. A professional locksmith can handle the entire process of replacing keys including programming a new key to your 500. In fact, they’ll provide you with a replica key that works just like your original fob (and costs less than the price).