Guide To Ghost Immobiliser 2: The Intermediate Guide To Ghost Immobiliser 2
Protects your vehicle against key cloning and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicle’s data network via CAN and an individual PIN code has to be entered in order for the engine to start.
Unlike trackers Ghost does not transmit radio frequency signals & can’t be detected using diagnostics tools. Ghost doesn’t have LED indicators or buttons that could indicate its presence in your vehicle or van.
Anti-key cloning
The Ghost immobiliser was created to prevent key cloning. This device connects to the CAN data network in your vehicle and generates a unique pin code push sequence by using the factory buttons on your dashboard as well as the steering wheel. This stops the criminal from being able to start your vehicle. If the incorrect PIN is entered, it will prevent the engine from starting and making it impossible for you to drive away with joy and pride.
Ghost immobilisers use an innovative technology that is extremely difficult for thieves to defeat. The ghost immobiliser fitting near me immobiliser, unlike physical deterrents like wheel locks and steering locks that are able to be cut, is a discrete electronic device. It’s not even recognized by thieves as it does not emit radio signals and is operated in a silent manner.
This next generation immobiliser is able to protect your car from a variety of threats, including key-hacking, cloned keys and even relay attacks. It is also able to stop thieves from acquiring an additional key or replacing your ECU in the sense that it will not allow the car to start without entering the correct PIN number first.
Contrary to other immobilisers, the ghost immobiliser 2 doesn’t require any additional remote or key fobs for operation. It is able to be deactivated via the driver’s mobile with a simple application. This is ideal for those times when you need to hand your car over for valet parking or for servicing without the key fobs.
The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It is designed to make it as easy and convenient to use while remaining as secure as possible. This is achieved by connecting the Ghost-II with the vehicle’s CAN data network, meaning there aren’t any wires that are able to be hidden or easily discovered. It also comes with an integrated feature that allows you to disable your Ghost-II by connecting to the vehicle’s Bluetooth and you’ll be able to enter and drive with no hassle.
OBD port hacking
OBD port hacking has become the latest method used by professional car thieves. Thieves are able to access your vehicle’s OBD with an laptop, mobile app, and some cables that can be bought on the internet for less than PS50. Once they have access, they can do anything they like including resetting your vehicle’s fault codes, tuning your vehicle, or stealing it in less than a minute.
It can protect your vehicle from being taken away by requiring a unique PIN sequence to be entered along with your key fob before you can start the engine or drive away. It does this by communicating with the vehicle’s ECU (Engine Control Unit) on the CAN Data circuit and is indetectable to any scan or code grabbing technology. It has a Service/Valet Mode that allows your vehicle to start without the PIN code.
You will also need a cable with OBD pins that connect to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You’ll also require cables with OBD pins that connect to the CAN bus. These are available on eBay and Amazon for around PS50. You then need to splice the cable into the wiring harness of your car, for example, in the radio wiring harness.
Once the hacker has access to the OBD port of your vehicle, they will send diagnostics to the system using high baud rate that will cause a crash of the car’s CAN, and prevent the system from functioning. This can cause the engine to stall and doors to lock, or even the brakes to engage.
No remotes or ghost immobiliser 2 keys are required.
The car immobiliser is a great piece of anti-theft technology utilized by millions of modern cars all over the world. An aftermarket immobiliser helps protect your vehicle through the use of engine ECU software that prevents cars from starting if a false transponder is transmitted.
It is possible for a criminal, if they have the code to disable an immobiliser, to disable it. The battery in most key fobs is easily removed by prying it open which means that a burglar could employ a simple tool remove the immobiliser’s inner circuit board and replace it with a blank. They will then be able start your car.
With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser communicates with vehicle’s engine ECU (Engine Control Unit) via a discrete quiet CAN data circuit that is undetectable with diagnostic tools like those employed by high-tech thieves. It does not come with a traditional keyfob that has an LED indicator, ghost Immobiliser 2 so it’s inaccessible.
It is possible to disable Autowatch’s Ghost 2 protection at times, such as during valet parking or during a service. The ghost CAN immobiliser has a special mode to do this, referred to «Service Mode’ which is activated by a push of a button on your phone. The vehicle can still be operated however its maximum speed will be limited to 36mph for added security.
Contact us today to set up a demonstration at our workshop. A member of the team will provide a full breakdown of the process and will provide you with owner manuals, installation certification, Ghost 2 emergency card and security guarantee.
Simple PIN code Change Process
Ghost is a next generation device that secures your vehicle without cutting wires or installing aftermarket key fobs. It connects directly with the vehicle’s CAN data network. A personal PIN can be programmed using buttons on the dash and steering wheel. The device does not emit RF signals, so it is unable to be manipulated. This makes it impossible to be detected using sophisticated scanning and RF techniques that are used by modern thieves.
The PIN code sequence can be altered whenever you wish to block previous drivers. It even comes with an override code in the event of lost sequences. The installer will guide you through the procedure to accomplish this during installation. The system also has a valet mode feature which can be used to temporarily disable the pin input sequence so that your garage or mechanic can service the car without having to know the code. This is ideal for those who wish to surrender their vehicle for valet parking / service but still don’t want to divulge the PIN sequence.
Ghost is an unobtrusive system that utilizes the buttons on your vehicle to create a unique and interchangeable PIN sequence. This sequence is entered using the app on your smartphone, which means that no additional LEDs are being thrown, and your vehicle is secure and safe from the possibility of being disabled by hackers or any other technology.
Every vehicle is tested
Contrary to key fobs which require you to press buttons the ghost immobiliser is discreetly installed under the dash or steering wheel so that you don’t even know it’s there. The device is connected to your vehicle’s CAN data network, and the personalised PIN code is programmed using existing buttons on your car. The system then prevents the engine from starting until the code is entered first. This means that thieves are unable to duplicate your keys or access the OBD port to hack into your vehicle.
Ghost is a great option for all vehicles that use electric vehicles, vans, motorhomes and bicycles. It’s also incredibly versatile and can be programmed to turn off in a variety of situations. It is possible to program it to go into Valet mode, for example when the vehicle is taken to a valet service or parking company. This allows you to drive your car within a speed limit of 30 mph, and the ghost immobiliser will turn on itself when your vehicle returns to your possession.
The device can also be reset at any time to your personal PIN code. This is great in the event that you forget the code or when the device ceases to function.
It’s also worth noting that the device is completely unnoticeable to anyone who isn’t familiar with it. It does this by analyzing the buttons on your steering wheel and dashboard and then using the information it sends to determine the button that was hit. This makes it a safe and solid security system that is not able to be tampered by RF scanning, jamming, or a door lock pick set.