Take A Look At The Steve Jobs Of The Upvc Window Handle Replacement Industry

UPVC Window Handle Replacement

It’s simple to replace a broken window handle with the right tools. But it’s essential to know the handle’s type and spindle length before buying an alternative.

Older uPVC window handles have a spur which protrudes and locks over a wedge striker for cockspur. They can be right or left-handed and have to be replaced with the same handle.

What type of lock and handle do I have?

There are a variety of upvc double glazing window replacement locks and handles, each with its own advantages and purposes. The type of handle you own will determine whether or not the locking mechanism you have is effective and also if it is simple to open windows. Over time and through regular use, window handles made of upvc may become damaged or worn out, making them less effective and secure. In certain instances, they might even fall off completely. It is important to repair the handles on your window made of upvc when you begin to notice them falling off. This will prevent possible break-ins and ensure that your home is secure.

Luckily, replacing your window handles made of upvc is a simple task that is achievable by nearly anyone. With a few basic tools and the right information, this is a simple procedure that should take no more than a couple minutes. To get started, upvc window Handle replacement you will need to determine the kind of handle and lock you have on your upvc window, which will help you identify the best replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also come with spindles that run through the middle of the handle, and into the frame of the window to activate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have distinct hook-shaped designs. Cockspur handles are held to the frame of the window with one screw, and are less secure than other varieties of window handles.

Handles that turn and tilt

The tilt and turn handles are different from other upvc handles because they can be rotated to open the window and then tilted into the window to ventilate. Generally, they have a 7mm spindle on the back of the handle. They are available in left and right handed versions.

When you are purchasing replacement handles for upvc, it is important to verify the length of the spindle because not all handles are identical in size. Drop something in the middle of the hole to test the length. This is the maximum size of spindle that will fit in your windows.

What is a spindle?

uPVC window handles work similar like doors, turning the handle to activate a latch inside the frame. The window can then be opened and shut. But, at times, the handles may become damaged, particularly if they are regularly used or exposed to extreme weather conditions. This could mean that you have to replace your uPVC handles for windows as they might not be able to operate the window in a proper manner anymore.

There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit into the uPVC frames in a variety of ways, and each type of handle utilizes a specific spindle to lock the mechanism fitted into the window. It is important to identify the kind of handle that is installed on your uPVC windows so that you can replace it with the right one.

You can check what type of uPVC handle you are using by taking a look at the base of the handle. A snap-in covers should be over the screw that holds the base of the handle in position. When you remove this cover, you will be able see the second screw that holds the handle base in position. After both screws have been removed, you should be in a position to pull the handle away from the uPVC window.

Once you have removed your uPVC window handle, you have to carefully remove the old spindle from the locking mechanism. Note the length of the spindle. You’ll need purchase a replacement with the same length as the original handle and locking device.

The main issue with most window handles made of uPVC is that the handle spindle gets worn-out and is unable to longer operate the locking mechanism. This can be caused by corrosion, damage caused by continuous use, or even the locking mechanism becoming looser. If this occurs, it is required to replace the window handle and the locking mechanism to restore full functionality to your uPVC windows.

How do I remove the old handle?

Window handles are susceptible to being damaged or even broken over the course of time. It is crucial to repair them as quickly as you can to ensure your security. It is good to know that replacing a worn or damaged handle is a fairly simple task that can be accomplished in less than one minute and doesn’t require any special tools.

To remove the handle, first remove the screw at the bottom of the handle. Once this is removed the handle will be removed from the base section. A second screw will be located at the base of the handle. It can also be removed. Once both of these screws are removed, the handle can be completely detached from the base portion of the window.

After the handle has been removed, you can take the new handle and align the fixing holes with the holes that are present in the window frame. If there is a cap or sticker on the new handle, take it off it if needed and screw the handle in place. It is important to check that the handle is working after it is installed. Turn the handle around and ensure that the lock mechanism is activated.

Espag handles have a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the window frame. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame of the window or the transom crossmember of the bar.

After you have installed the new handle, insert the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is fixed. The handle is now ready to use by opening and closing the window several times to ensure that it works well and securely.

How do I install the new handle?

It’s not difficult to alter the handle on your windows made of uPVC. The process is very simple. You only need a screwdriver and a bit of patience. First, ensure that the old handle is unlocked. Then, remove any screws that are visible. You can also replace them with screw caps. After removing the handle you’ll need to take note of the length of the spindle which extends from the back. This is important as it will determine the type of handle that you will need to purchase.

Espagnolette handles are the most commonly used type of handle for uPVC windows. They have a spindle that is inserted into the handle and operates an internal locking mechanism within the window frame. The handle opens the latch and allows the window to open. Over time and through regular use, espagnolette handles can become damaged or impaired which is why it is essential to locate a replacement.

Cadenza handles are a different kind of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding knife that works with a multiple-point locking mechanism within the window. They are more secure than espagnolette handles since they only open from the inside. They can be replaced by the same procedure as espagnolette handles however you must ensure that the new handle has a curved blade, as opposed to a flat one.

After you have picked the right handle, simply align the new handle to existing screw holes prior to screwing it in place. After that, you should put the screw covers back on and test that the new handle is working properly. You can accomplish this by moving the handle between the locked position to the unlocked one a few time. If you experience any issues, it may be worth contacting a specialist to determine if they can assist in resolving the issue. They are often able to advise you on the best way to resolve the issue in a quick and effective manner.