Ten Pinterest Accounts To Follow Window Repair

Window Repairs

Window repairs can help homeowners save money and keep their homes warm. In the event of serious damage, such as broken glass or a shattered frame, window replacement may be required.

But there are many other issues that can be fixed to prolong the lifespan of your windows. The most frequent issues are:

Broken or cracked Panes

If it’s an unintentional rock being tossed by your lawnmowers, or a tree branch blown by high winds, cracked window glass is not only ugly, but it can also result in higher electricity bills as the broken pieces let cold air to enter your home. Luckily, it’s typically easy to repair windows that have damaged panes.

Start by carefully removing glass using gloves and sunglasses. You may have to use a utility knife to loosen any remaining putty or old glazing compound around the edges of the frame. Next, Window replacement use a soft cloth or paper towel to clean the surface of the glass and the wood of the frame.

After the area is cleaned and dry, apply a waterproof silicone caulking on the perimeter of the frame. This will prevent water from entering the frame through the cracks and result in further damage.

If you have double-paned glass, cracks that are not treated properly could weaken the gas layer that lies between the panes and make your windows less efficient in insulating. If the crack is so severe that it threatens the integrity of the window, or if the inner pane is missing it is possible to consult an expert.

Cracks in thermal stress can occur when there’s an extreme difference in temperature between the inside and outside of your home, causing the glass to expand or contract. If this happens to two windows it’s recommended to replace the glass instead of attempting to repair it.

Clear tape can be used to seal cracks in windows that aren’t yet ready to be replaced. It also keeps out cold winds and bugs. You can also cut the length of a nylon stocking to completely cover the crack and glue it with duct tape. This isn’t a permanent solution however it’s a great solution in a pinch and it keeps cold air and insects away from your home. If you notice cracks appearing on the windows of your old ones, you should check with your local company to see whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a common problem with windows. It can ruin a house’s appearance and create a security risk. However, it is possible to repair rotted wood. You will first need to address the cause of the wood rot. Look for leaks on the roof and other places where water could get into the wood.

Next, you will need to take out any rotten parts of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After the areas that are rotten have been removed it is time to replace them with new wood. Pre-treated wood is recommended for this project, as it is resistant to decay. If you are unable replace the wood that has been damaged, you can try using filler or wood hardener to help strengthen the damaged area. Most hardware stores will have this type of product. Follow the instructions on the label of the product to ensure the most effective results.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant on the wood. Sikkens, for example is a great one to apply.

Use a two-part epoxy in order to protect the wood against further damage. This product is easy to apply and leaves a nice finish. However, it is very important to follow the directions for application on the label. Once the epoxy filler has dried, you can sand the wood’s surface. It is recommended to begin with a rough piece of sandpaper, and then progress to a smoother one.

You do not want to expose the damaged area to more moisture. Therefore, it is recommended to cover the repaired area with an oil-based primer that will protect it from moisture. Then, you can apply the waterproof wood sealant.

It won’t open

The reason a window won’t open can be the result of various factors. Wood frames can warp when exposed to humid weather, the house might have sunk or someone may have nailed it shut to protect themselves. With a little patience and the right tools, you can unlock most stuck windows.

The accumulation of gunk or debris can be a major cause of windows that aren’t opening. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. Metal hardware can also rust if it comes into contact humidity and direct sunlight. Maintaining these areas lubricated by spray grease can help to prevent the oxidation process and ensure that your window replacement is working correctly.

The pulleys used to raise or lower the window can be loosened, or break. These components can be weakened and obstructed when they are situated two or more floors above ground.

If you’re having trouble opening windows Try using a pry bar to gently push the window to open a bit at a time. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternately, you can run a hair dryer around the edges of the frame for several minutes to warm the wood and assist it move more easily.

A faulty spring can also be the reason for windows that don’t raise or lower. You’ll need to check your owner’s guide for more details based on the manufacturer of your windows.

If you’ve tried cleaning the moving parts of your windows and Window replacement lubricating them, but they’re still unable to open It could be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don’t let windows in your home become functional to unusable. If your windows aren’t properly shut could leave your home vulnerable for burglary and water damages. Contact us today for more information about our replacement windows as well as our services!