Watch Out: How Repairs To Upvc Windows Is Taking Over And What We Can Do About It

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor and installation could be trampled under.

It’s a good idea to seal the gap after the glass is removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you may think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems such as sagging. A window that isn’t properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sagging. You’ll first need to open the windows to reach the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you’ve repositioned the hinges, close the window and check for fitting. If you’re satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you aren’t able to move the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Luckily, it’s not difficult to fix a loose uPVC window handle yourself. First, you’ll need close the window and then perform an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it’s important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you must avoid ‘over-caulking’. This can make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part, hinges can wear out over time. It’s easy to change the hinges on a window, but it’s simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Window hinges that aren’t working properly can be caused by incorrectly opening the window a certain way or by poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are happy to provide assistance.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and the frame. If they are beyond repair, it may be required to realign them. The interlock, which is located on the hinge of the window, may be misaligned. Again, it’s feasible to give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc window repair near me will continue to provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to simply replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.