Why Do So Many People Want To Know About Replacement Window Handle?

Choosing uPVC Replacement Window Handles

Nearly all customers agree that these upvc replacement window handles are easy to install and feel like good quality. However, it is important to realize that the kind of handle you pick should be appropriate for your window.

The step height is the most important aspect. It is the distance between the handle and the frame or base. Other considerations include lockable styles and mechanisms.

Replacement parts

You can purchase a range of replacement handles made of upvc. There are a variety of styles and colours to choose from, so you’re sure to find one that will match your existing windows. It’s easy for you to make an impulse purchase particularly when the handle breaks. Therefore, it is best to look over a few aspects before purchasing the replacement. The first step is to be aware of the kind of handles made from upvc you have and what the differences are between them. The table below shows the most commonly used handles to help you find the one that will fit your upvc windows.

Espag handles are the most commonly used and are commonly found on modern double-glazed windows. They are typically attached to the frame with two screws that screw into the frame from both sides, above and below.

The spindle bar on the back could be of different in size, and will determine if they are left-handed or right-handed. This is why it’s essential to measure the current handle to ensure you’re getting the right replacement.

Typically fixed by two bolts, similar to the Espag handle but they have a low projection from the frame which means that the arm will not penetrate your blinds. This is a great option when you have blinds on your windows made of upvc and want to make sure the handle blends with them.

Cockspur handles resemble Espag handles, however they have a nose which closes over a wedge which rests on the frame of the window. This type handle is found on a few older wooden and Upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pressing at the top of the window. The window is opened from the inside and lets you to clean outside without needing to step out on a ladder or walk over the garden fence. These are also an excellent option for those who have limited mobility and improve security and access in the home.

Hints and tips

Many people will need to replace their uPVC window handles at some time. It’s important to have some tips and tricks that can help you make the task easier.

The first thing you should do is check what type of handle you have at home. Depending on the kind of handle and the locking mechanism, it may be necessary for you to replace the lock and handle. For instance, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to replace them, as well as the handle itself.

Fortunately, the majority of uPVC handles conform to industry standards and are alike. This makes replacing them an easy process. The first step is to remove the screw covers from the handles. These are usually pozi-drive screws. Once they are removed, you are able to take the handle apart.

It’s a great idea to take note of how far the spindle extends from the base of your handle when you separate it. This will allow you to determine the length of the spindle for a replacement handle. Simply measure the amount that the square peg sticks from the bottom of the handle.

This is particularly important for inline uPVC windows handles, as they are always straight and only open to the left or right. They won’t work in the middle. If you’re unsure of the kind of handle you have at home, it might be an excellent idea to borrow a handle from a neighbour’s home and observe how it functions to get an idea.

Another excellent way to figure out what handed the uPVC window handle is to simply look at how the handle moves when it is operating. Handed handles will turn either clockwise or counter-clockwise. If you are unsure, ask someone to open the window with the handle to see what happens.

Measure the spindle

It can be difficult to pick the right replacement window glass handle for your window since there aren’t all handles that have the same size. The spindle is the mechanism that locks the window and it is crucial to ensure that when installing the new handle that you measure the length of the spindle precisely to ensure that it will fit. There are many different kinds of uPVC window handles and upvc replacement window handles they operate in different ways, so it is vital to know the type of handle you have and the type of locking system you have.

Espag handles have a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, it will turn the lock inside the gearbox to open the window. They are used on uPVC windows with casement. They can be locked using keys to provide additional security.

Cockspur handles have an «nose» that closes over a wedge-shaped striker block on the frame. They are commonly found on older double-glazed uPVC windows. They are also quite easy to install and can be locked with keys. It is more difficult to replace these handles because they aren’t as common as the handles made of espagnolette.

If you have a tilt-and-turn uPVC then you’ll need a replacement handle with a different locking system. The handle can tilt the window and allow it to rotate around to fully open it. You must choose an opening handle that has a spindle cost of replacement windows uk at least 55mm in order to be able to reach the window frame.

The same method can be used to remove and replace the uPVC handle. But, you’ll have to be careful when unscrewing it. It is possible to open the window a little wider than usual to ensure that you can reach both screws that are fixing it to the frame. After you have installed your new uPVC handles and confirmed that they are in the proper position and tighten the screw covers and test the lock to ensure it is working properly.

Fit the new handle

Once you have the right replacement handle it is easy to screw in the right place. It will require a screwdriver, upvc Replacement window Handles and an electric one might be easier. When screwing the screws in, it is crucial not to over tighten the screws, as this can cause the handle to crack or warp.

Inserting the spindle is the second crucial step to install the new handle. This is the component that runs through the handle and operates the locking mechanism within the window. It is essential that the component is properly fitted, as this will allow the window to be opened and shut securely.

There are a variety of types of uPVC handles. They include:

Espagnolette Handles are handles inline which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles — these are similar to the inline handle however they have a curvaceous design that can be useful for windows in hard-to-reach locations.

Tilt and turn handles — These are used on tilt and turn windows to operate the opening and closing mechanisms.

These are the most common and the majority of uPVC windows have these in their place. In the UK they are often called «Bay Windows».

It can be a hassle when your uPVC handle breaks. There isn’t any need to replace the entire uPVC windows because of a damaged handle. There are a few easy steps you can take to fix or replace a broken uPVC handle.

Fixing your broken window handle swiftly by identifying the model and determining the spindle. It is important to take your time and prioritise safety when working with windows and tools but this is a simple task. It could mean the difference between a safe and secure home or a window that can be easily opened. Bridgewater Glass is the place to go if you have questions or want to speak with an expert regarding replacing your window handle. We have a team of experienced and knowledgeable professionals who can assist you with any problems you might be experiencing.