Why We Love Double Glazing Door Lock Repairs (And You Should Too!)

Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows and doors aren’t aligned properly or are difficult to operate.

You’ll lose energy if your double-glazed doors don’t work properly. This increases the risk of burglary. Owen the Locksmith will be able to repair your door lock for a reasonable cost.

Snapped Key

It can be quite frustrating when a key snaps into a lock. It can also be a security issue in that it can expose you to burglars if your door does not lock. Fortunately, there are quick fixes that you can use to solve the problem and get your door functioning properly again.

Be calm. If you panic you may end up pushing the damaged key piece further into the lock.

Spray WD-40 or another penetrating lubricant into the lock. This will assist the broken piece emerge more easily. You can also employ a screwdriver in order to break up any stuck pieces that might be hindering the flow. If you have a part of the key that’s stuck out and is not being removed, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but you must be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges, which can serve as a hook extractor, and some Jigsaw blades can also be used for this purpose. If you don’t have any of them handy, you can make use of needle-nose pliers that bend to create hooks. You can also use a pair of tweezers grab and pull out the last piece of broken keys.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It’s available in many hardware stores and is used to freeze any moisture present inside the lock.

If none of these strategies are working you, it’s the time to contact a locksmith. Fitlocks experts can quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also alter the double glazing door mechanisms so that they are more easy to operate. Request a repair for your double glazing with us online or give us a phone call to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose a serious security risk. A professional locksmith is able to repair the cylinder. Locksmiths will need to tap the cylinder in order to fix it. This can be accomplished with the hammer or other tool. The best method is to make use of a wire or a long match. Then, place the match’s tip or wire in the keyway. The locksmith will then strike the lock in order to break it. This is better than using a hammer, which can cause damage to the lock.

The most frequent cause for cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made of different metals like cast-iron and aluminum. Different metals will be heated and cool at different rates. This could cause localized hotspots to expand faster than the rest.

Corrosion is another possible cause of fractures in cylinders. If the head and block of a cylinder are not maintained in a timely manner they may rust or corrode, which can cause them to expand more than they would normally. This can cause cracks as time passes.

If your uPVC window lock or door is brittle or requires lots of pressure to turn, it could be due to many things. This can result from a defective locking mechanism or misalignment and also a worn out handle.

Fortunately it is a simple and affordable fix for the majority of double glazing owners. A professional locksmith will typically be able to resolve this issue within a matter of hours of arriving at your property. They can repair the locking mechanisms, Window Doctor or change the window handles, and also change the gearboxes, based on your specific needs. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They can even suggest upgrades to the highest-security 3 Star euro cylinders TS007 that add an extra layer of security against burglars. This is a small price to pay for the peace of mind that comes with knowing your uPVC doors are safe.

Broken Handle

It’s not a surprise that window handle locks could break. They are equipped with complex mechanisms that become less effective over time. If yours is damaged, it can be difficult to identify the cause of the issue and make sure you fix it correctly.

The issue could be related to the locking mechanism inside or the latch, fixing your broken handle will improve your uPVC double glazing door’s security and window doctor help you stop draughts. It could be costly to replace or repair your handle if it is not done correctly and can also damage the frame and the lock of your door.

Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, usually concealed by a screw cap for aesthetic reasons. It is important to not lose any internal components of the handle like the levers and plates on either side. Keep them in the same arrangement to make it easier to replace if necessary.

Next, turn the handle until it’s 90 degrees to the window doctor near me frame. Finally, loosen the screw on the back of the handle that holds it to the internal spindle with another screwdriver. Once the screw is loose, pull the handle out and take out the broken spindle. Replace it with a brand new one, making sure that it’s the same length as the old one (you can typically find these on the internet or at hardware stores) and screw it securely into the correct position. Be cautious not to overtighten because this could cause damage to the handle or the window frame.

Ensure the new handle is fitted, then close and test the handle. It should work smoothly, and you will be able to open your window once more.

Don’t forget to double-check that your uPVC window is shut properly when you’re using the handle. If they’re not closing correctly, you could encounter damp or draughts inside your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on your window frames to ensure that they shut correctly.

Broken Spindle

It is often the case that the spindle inside a handle breaks rather than the handle itself. This is particularly common with upvc repairs near me tilt-and-turn windows. These windows require a handle that acts as a locking mechanism within the window frame. The handle is connected to a rod in the centre that in turn activates mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism is not able to open after the handle has been turned, it is likely the spindle has been damaged. This could be a frustrating problem.

Luckily, there are ways to fix this problem. A reputable locksmith will be able to quickly and effectively fix this problem. A reputable locksmith will be able disassemble the handle of the Window Doctor by using a tool to remove the wheel portion in which the spindle is. This is done without causing any damage to the handle or causing any other damage to the frame of the window.

After the wheel has been removed, the technician can examine the spindle to determine what caused it to break. This involves disassembling the spindle and examining each component part, noting any damage or excessive wear. This process is typically performed in a clean room by skilled technicians.

Next, clean the damaged spindle. This will remove any debris or dirt that might be preventing it from working normally. After that, the spindle could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is similar in size to the original. The technician will then drill holes that are identical to both pieces. This ensures that the new spindle is precisely matched to the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it entirely. Home centres sell generic substitutes but if the window design is unique, you will need to contact a cabinet maker or woodworker who can replicate the exact component. Once the spindle has been installed, it is attached to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the handle is securely seated, you can operate your uPVC windows.